Español ES
Ver en GitHub

Omzdwwi Pending Manager Strategy

Overview

The Omzdwwi Pending Manager Strategy is a direct high-level StockSharp translation of the MetaTrader 4 expert omzdwwi7739cyjayvs_1_65.mq4. The original advisor focuses on maintaining a ring of pending orders around the current market price, executing market entries on a scheduled timer, and managing trailing stops for both active positions and outstanding pending orders. This C# version reproduces the same logic while leveraging StockSharp's Strategy API, SubscribeLevel1 feed, and order management helpers (BuyStop, SellLimit, ReRegisterOrder, etc.).

The strategy continuously:

  • Keeps up to four pending orders (buy stop, sell stop, buy limit, sell limit) at configurable distances from bid/ask quotes.
  • Optionally fires market buy/sell orders at a specific hour and minute.
  • Applies multiple layers of exits for market positions: fixed take-profit, fixed stop-loss, additional "pips profit" target, and trailing stop logic that mimics the expert's TrailingPositions() routine.
  • Moves pending orders closer or further from price according to the expert's TrailingOtlozh() rules once the market advances by the configured trailing distance.
  • Monitors account-level profit and loss thresholds, emitting info/warning logs when the configured global take-profit or stop-loss percentages are reached.

Signal flow and data subscriptions

  • SubscribeLevel1() delivers bid/ask updates. Each quote update triggers time checks, order placement, trailing adjustments, and exit checks. No candle data or indicators are required.
  • GetWorkingSecurities() declares the level-1 subscription so the strategy may run in both live and backtesting environments.

Entry logic

  1. Scheduled market orders. When UseTimeSignals is enabled and the server clock reaches SignalHour:SignalMinute, the strategy raises boolean latches derived from the Time*Signal parameters. The next level-1 update calls BuyMarket() or SellMarket() provided WaitClose/MaxMarketOrders allow it. Latches reset immediately after the trade.
  2. Persistent pending orders. For each enabled order type (EnableBuyStop, EnableSellStop, EnableBuyLimit, EnableSellLimit) the strategy verifies there is an active order. Absent orders are placed at Distance * PriceStep points from the best bid/ask, replicating the expert's UstanOtlozh() behaviour. If the order already exists, ReRegisterOrder keeps the price aligned to current quotes.

Exit logic for market positions

  • Fixed stop-loss / take-profit come from MarketStopLossPoints and MarketTakeProfitPoints. When the best bid/ask crosses those thresholds the position is flattened via market order.
  • Additional pips target replicates the expert's PipsProfit behaviour. When non-zero, it closes the position after earning the configured profit even if TP is disabled.
  • Trailing stop copies TrailingPositions(). Once the position is sufficiently profitable (or immediately if RequireProfitBeforeTrailing=false), the internal trailing price is updated to Bid - MarketTrailingOffsetPoints * PriceStep for longs and Ask + MarketTrailingOffsetPoints * PriceStep for shorts with the minimum trail step enforced by MarketTrailingStepPoints.

Trailing logic for pending orders

  • Stop orders use StopTrailingOffsetPoints and StopTrailingStepPoints. When price crosses the MQL threshold (Ask < OrderPrice - (offset + step) for buy stops, symmetrical for sells) the order is re-registered to Ask + offset or Bid - offset.
  • Limit orders use LimitTrailingOffsetPoints and LimitTrailingStepPoints in the same manner, recreating the TrailingOtlozh() adjustments.

Risk & account monitoring

  • MaxMarketOrders limits how many lots (expressed in multiples of OrderVolume) can be accumulated per direction when WaitClose=false.
  • UseGlobalLevels, GlobalTakeProfitPercent, and GlobalStopLossPercent watch portfolio equity. When thresholds are exceeded the strategy writes an info or warning log, mirroring the original alert pop-ups.

Parameters

Group Parameter Description
General OrderVolume Trade volume (lots) reused by every order.
Execution WaitClose Block new entries until the net position is flat.
Execution MaxMarketOrders Maximum concurrent lots per direction when pyramiding is allowed.
Pending Orders EnableBuyStop / EnableSellStop / EnableBuyLimit / EnableSellLimit Enable or disable each pending order type.
Pending Orders StopStepPoints, LimitStepPoints Distance in points used to place stop/limit orders relative to the current bid/ask.
Pending Orders StopTakeProfitPoints, StopStopLossPoints, LimitTakeProfitPoints, LimitStopLossPoints Protective distances applied once pending orders trigger.
Pending Orders StopTrailingOffsetPoints, StopTrailingStepPoints, LimitTrailingOffsetPoints, LimitTrailingStepPoints Trailing parameters for outstanding pending orders.
Market Risk MarketTakeProfitPoints, MarketStopLossPoints Take-profit and stop-loss in points for market positions.
Market Risk MarketTrailingOffsetPoints, MarketTrailingStepPoints, RequireProfitBeforeTrailing Trailing stop configuration for market positions.
Market Risk ExitProfitPoints Additional fixed profit target.
Time Management UseTimeSignals, SignalHour, SignalMinute Scheduled execution settings.
Time Management TimeBuySignal, TimeSellSignal, TimeBuyStopSignal, TimeSellStopSignal, TimeBuyLimitSignal, TimeSellLimitSignal Which orders to trigger when the timer fires.
Account Monitoring UseGlobalLevels, GlobalTakeProfitPercent, GlobalStopLossPercent Portfolio-level alert thresholds.
Misc SlippagePoints Reserved legacy parameter maintained for completeness.

Conversion notes

  • The MQL expert set take-profit/stop-loss directly on pending orders. StockSharp places the pending entry first and then manages exits through strategy logic to keep the implementation within high-level API constraints.
  • Sound alerts were omitted because StockSharp logging already provides structured notifications.
  • MetaTrader's MODE_STOPLEVEL constraint does not exist in StockSharp; therefore the parameters rely on the trader to respect exchange-imposed minimum distances.
  • Error handling uses AddInfoLog/AddWarningLog instead of Alert() popups.

Usage

  1. Attach the strategy to a Security and Portfolio with a valid price step.
  2. Configure distances in points (they are automatically converted to price units using the security's ShrinkPrice).
  3. Start the strategy; it will subscribe to level-1 quotes and begin managing orders immediately.

Tip: When backtesting, ensure the tester feeds level-1 data so that the trailing and timing logic receive updates on every quote just like the original MQL expert.

using System;
using System.Collections.Generic;

using Ecng.Common;

using StockSharp.Algo.Indicators;
using StockSharp.Algo.Strategies;
using StockSharp.BusinessEntities;
using StockSharp.Messages;

namespace StockSharp.Samples.Strategies;

/// <summary>
/// Omzdwwi Pending Manager strategy - RSI reversal with SMA filter.
/// Buys when RSI crosses below oversold and close is above SMA.
/// Sells when RSI crosses above overbought and close is below SMA.
/// </summary>
public class OmzdwwiPendingManagerStrategy : Strategy
{
	private readonly StrategyParam<int> _rsiPeriod;
	private readonly StrategyParam<int> _smaPeriod;
	private readonly StrategyParam<decimal> _oversold;
	private readonly StrategyParam<decimal> _overbought;
	private readonly StrategyParam<DataType> _candleType;

	private decimal _prevRsi;
	private bool _hasPrev;

	public int RsiPeriod { get => _rsiPeriod.Value; set => _rsiPeriod.Value = value; }
	public int SmaPeriod { get => _smaPeriod.Value; set => _smaPeriod.Value = value; }
	public decimal Oversold { get => _oversold.Value; set => _oversold.Value = value; }
	public decimal Overbought { get => _overbought.Value; set => _overbought.Value = value; }
	public DataType CandleType { get => _candleType.Value; set => _candleType.Value = value; }

	public OmzdwwiPendingManagerStrategy()
	{
		_rsiPeriod = Param(nameof(RsiPeriod), 14)
			.SetDisplay("RSI Period", "RSI lookback", "Indicators");
		_smaPeriod = Param(nameof(SmaPeriod), 20)
			.SetDisplay("SMA Period", "SMA lookback", "Indicators");
		_oversold = Param(nameof(Oversold), 40m)
			.SetDisplay("Oversold", "RSI oversold level", "Indicators");
		_overbought = Param(nameof(Overbought), 60m)
			.SetDisplay("Overbought", "RSI overbought level", "Indicators");
		_candleType = Param(nameof(CandleType), TimeSpan.FromMinutes(5).TimeFrame())
			.SetDisplay("Candle Type", "Candle timeframe", "General");
	}

	/// <inheritdoc />
	protected override void OnReseted()
	{
		base.OnReseted();
		_prevRsi = default;
		_hasPrev = default;
	}

	/// <inheritdoc />
	public override IEnumerable<(Security sec, DataType dt)> GetWorkingSecurities()
		=> [(Security, CandleType)];

	protected override void OnStarted2(DateTime time)
	{
		base.OnStarted2(time);
		_prevRsi = 0;
		_hasPrev = false;

		var rsi = new RelativeStrengthIndex { Length = RsiPeriod };
		var sma = new SimpleMovingAverage { Length = SmaPeriod };

		var subscription = SubscribeCandles(CandleType);
		subscription.Bind(rsi, sma, ProcessCandle).Start();

		StartProtection(
			takeProfit: new Unit(2, UnitTypes.Percent),
			stopLoss: new Unit(1, UnitTypes.Percent));
	}

	private void ProcessCandle(ICandleMessage candle, decimal rsi, decimal sma)
	{
		if (candle.State != CandleStates.Finished) return;
		var close = candle.ClosePrice;

		if (!_hasPrev) { _prevRsi = rsi; _hasPrev = true; return; }

		var oversold = Oversold;
		var overbought = Overbought;

		if (_prevRsi < oversold && rsi >= oversold && close > sma && Position == 0)
		{
			BuyMarket();
		}
		else if (_prevRsi > overbought && rsi <= overbought && close < sma && Position == 0)
		{
			SellMarket();
		}
		_prevRsi = rsi;
	}
}