Auf GitHub ansehen

Color JFATL Digit Duplex-Strategie

Übersicht

Die Color JFATL Digit Duplex-Strategie ist ein Zwei-Modul-System, das aus dem MetaTrader 5 Expert Advisor Exp_ColorJFatl_Digit_Duplex konvertiert wurde. Sie betreibt zwei unabhängige Signalströme basierend auf dem Color Jurik Fast Adaptive Trend Line (JFATL) Indikator. Das Long-Modul sucht nach bullischen Übergängen in der Farbkarte des Indikators, während das Short-Modul auf bärische Übergänge reagiert. Jede Seite hat ihre eigenen Glättungsparameter, Preisquelle, Rundungsgenauigkeit, Balkenverschiebung und Schutz-Offsets.

Die StockSharp-Implementierung verwendet die High-Level-API mit Kerzensubskriptionen und einer dedizierten Indikatorklasse, die die FATL-Kernelgewichte und Jurik-Glättung reproduziert. Der Indikator gibt den gerundeten JFATL-Wert zusammen mit den aktuellen und vorherigen Farbcodes aus, die für die Signalerkennung benötigt werden.

Indikatorlogik

  1. FATL-Faltung – die letzten 39 Preise (ausgewählt durch die angewendete Preisoption) werden mit den ursprünglichen FATL-Koeffizienten gewichtet, um eine gefilterte Reihe zu erzeugen.
  2. Jurik-Glättung – der FATL-Ausgang wird durch einen Jurik Moving Average (JMA) geleitet. Der Phasenparameter wird durch Anwenden einer Differentialanpassung emuliert, die den geglätteten Wert vor- oder zurückschiebt.
  3. Ziffernrundung – das Ergebnis wird auf die angegebene Anzahl von Ziffern gerundet, um den "digitalisierten" Ausgang des ursprünglichen Indikators nachzuahmen.
  4. Farbzuweisung – der Farbpuffer wird auf 2 gesetzt, wenn der aktuelle Wert steigt, auf 0 wenn er fällt, und erbt andernfalls die vorherige Farbe. Ein konfigurierbarer SignalBar-Parameter wählt aus, welcher historische Balken zusammen mit seinem vorherigen Balken untersucht werden soll.

Der Indikator gibt einen komplexen Wert zurück, der die gerundete JFATL-Ablesung, die Farbe bei SignalBar, die vorherige Farbe und die Schließzeit des Signalbalkens enthält. Strategie-Handler verwenden diese Information, um Zustandsübergänge genau wie im MetaTrader-Code zu identifizieren.

Handelsregeln

  • Long-Modul
    • Eröffnet eine Long-Position, wenn die Farbe bei SignalBar auf 2 wechselt, während die vorherige Farbe nicht 2 war und keine Long-Exposition vorhanden ist.
    • Schließt eine bestehende Long-Position, wenn die Farbe bei SignalBar 0 wird.
  • Short-Modul
    • Eröffnet eine Short-Position, wenn die Farbe bei SignalBar auf 0 wechselt, während die vorherige Farbe über 0 lag und keine Short-Exposition vorhanden ist.
    • Schließt eine bestehende Short-Position, wenn die Farbe bei SignalBar 2 wird.
  • Positionshandling – Aufträge werden so dimensioniert, dass die entgegengesetzte Exposition eliminiert wird, bevor ein neuer Trade auf der anderen Seite eröffnet wird. ClosePosition() wird für Ausstiege verwendet, sodass die Strategie jederzeit eine einzelne Nettoposition aufrechterhält.

Risikomanagement

Jedes Modul hat individuelle Stop-Loss- und Take-Profit-Abstände in Preisschritten. Wenn eine neue Position eröffnet wird, zeichnet die Strategie den Einstiegspreis auf und berechnet die Schutzlevel mit dem aktuellen PriceStep des Wertpapiers. Bei jeder Indikatoraktualisierung wird das entsprechende Kerzenhoch/-tief gegen die gespeicherten Level getestet:

  • Bei Long-Trades schließt die Strategie die Position, wenn das Kerzentief den Stop-Preis erreicht oder das Kerzenhoch den Take-Profit-Preis erreicht.
  • Bei Short-Trades wird die Logik mit Kerzenhoch für den Stop und Kerzentief für den Take-Profit gespiegelt.

Das Deaktivieren des Stops oder Takes durch Setzen des Abstands auf null lässt den Trade unverwaltet, bis der Indikator ein Ausstiegssignal ausgibt.

Parameter

Gruppe Parameter Beschreibung
Allgemein LongCandleType Zeitrahmen für die Long-Indikatorsubskription.
Allgemein ShortCandleType Zeitrahmen für die Short-Indikatorsubskription.
Indikator (Long) LongJmaLength Jurik-Moving-Average-Länge für das Long-Modul.
Indikator (Long) LongJmaPhase Phasenanpassung am langen JMA-Ausgang (Bereich −100…100).
Indikator (Long) LongAppliedPrice Angewendete Preisquelle in der FATL-Faltung.
Indikator (Long) LongDigit Anzahl der Ziffern zur Rundung des Indikatorwerts.
Indikator (Long) LongSignalBar Historischer Balkenoffset für Signale (0 = aktuell geschlossener Balken).
Risiko (Long) LongStopLossPoints Stop-Loss-Abstand für Longs in Preisschritten.
Risiko (Long) LongTakeProfitPoints Take-Profit-Abstand für Longs in Preisschritten.
Handel (Long) EnableLongOpen Aktiviert oder deaktiviert neue Long-Einstiege.
Handel (Long) EnableLongClose Aktiviert oder deaktiviert Long-Ausstiege durch den Indikator.
Indikator (Short) ShortJmaLength Jurik-Moving-Average-Länge für das Short-Modul.
Indikator (Short) ShortJmaPhase Phasenanpassung am kurzen JMA-Ausgang.
Indikator (Short) ShortAppliedPrice Angewendete Preisquelle für den Short-Indikator.
Indikator (Short) ShortDigit Anzahl der Ziffern zur Rundung des Short-Indikatorwerts.
Indikator (Short) ShortSignalBar Historischer Balkenoffset für Short-Signale.
Risiko (Short) ShortStopLossPoints Stop-Loss-Abstand für Shorts in Preisschritten.
Risiko (Short) ShortTakeProfitPoints Take-Profit-Abstand für Shorts in Preisschritten.
Handel (Short) EnableShortOpen Aktiviert oder deaktiviert neue Short-Einstiege.
Handel (Short) EnableShortClose Aktiviert oder deaktiviert Short-Ausstiege durch den Indikator.

Verwendungshinweise

  1. Weisen Sie den Long- und Short-Modulen geeignete Kerzentypen zu. Diese können auf verschiedene Zeitrahmen zeigen, wenn gewünscht.
  2. Konfigurieren Sie den angewendeten Preis und die Rundungsziffern, um die Instrumenteigenschaften des ursprünglichen Expert Advisors anzupassen.
  3. Der SignalBar-Parameter steuert, wie viele geschlossene Kerzen zurück das Signal validiert wird. Setzen Sie ihn auf 1, um den MT5-Standard (vorherige abgeschlossene Kerze) zu replizieren.
  4. Stellen Sie sicher, dass die Volume-Eigenschaft der Strategie die gewünschte Handelsgröße widerspiegelt. Beim Umkehren von Positionen addiert die Strategie automatisch die Größe der bestehenden Exposition, damit die Nettoposition korrekt kippt.
  5. Stops und Ziele basieren auf dem PriceStep des Wertpapiers. Für Instrumente ohne definierten Tick-Preis standardmäßig auf rohe numerische Schritte.

Konvertierungshinweise

  • Der Jurik-Phasenparameter in StockSharp wird durch Anwenden einer Vorlauf/Nachlauf-Differentialanpassung emuliert, da der paketierte JurikMovingAverage keine direkte Phaseneigenschaft freilegt. Dies bewahrt das Verhalten des ursprünglichen Experten, einschließlich aggressiver oder verzögerter Reaktionen.
  • Die Strategie verwendet ein einzelnes Nettopositionsmodell. Die MetaTrader-Version konnte mehrere Aufträge pro Richtung ausführen; in StockSharp konsolidiert die Logik sie in jeweils eine Long- oder Short-Exposition.
  • Schutzlevel werden bei jedem Indikatorkerzenabschluss statt auf jedem Tick ausgewertet. Dies entspricht der Signalfrequenz des MT5-Experten und hält die Implementierung innerhalb der High-Level-API-Richtlinien.

Dateien

  • CS/ColorJfatlDigitDuplexStrategy.cs – Strategieimplementierung mit dem benutzerdefinierten Indikator.
  • README.md / README_zh.md / README_ru.md – Dokumentation auf Englisch, Chinesisch und Russisch.
using System;
using System.Linq;
using System.Collections.Generic;

using Ecng.Common;
using Ecng.Collections;
using Ecng.Serialization;

using StockSharp.Algo.Indicators;
using StockSharp.Algo.Strategies;
using StockSharp.BusinessEntities;
using StockSharp.Messages;

namespace StockSharp.Samples.Strategies;

/// <summary>
/// Duplex strategy based on two Color JFATL Digit indicators with independent parameters for long and short trades.
/// The long module opens trades when the indicator turns bullish (color 2) and exits when it turns bearish (color 0).
/// The short module mirrors the logic, entering on bearish turns and exiting on bullish turns.
/// Optional stop loss and take profit offsets in price steps are available for each side individually.
/// </summary>
public class ColorJfatlDigitDuplexStrategy : Strategy
{
	private readonly StrategyParam<DataType> _longCandleType;
	private readonly StrategyParam<DataType> _shortCandleType;
	private readonly StrategyParam<int> _longJmaLength;
	private readonly StrategyParam<int> _longJmaPhase;
	private readonly StrategyParam<AppliedPrices> _longAppliedPrice;
	private readonly StrategyParam<int> _longDigit;
	private readonly StrategyParam<int> _longSignalBar;
	private readonly StrategyParam<int> _longStopLossPoints;
	private readonly StrategyParam<int> _longTakeProfitPoints;
	private readonly StrategyParam<bool> _enableLongOpen;
	private readonly StrategyParam<bool> _enableLongClose;

	private readonly StrategyParam<int> _shortJmaLength;
	private readonly StrategyParam<int> _shortJmaPhase;
	private readonly StrategyParam<AppliedPrices> _shortAppliedPrice;
	private readonly StrategyParam<int> _shortDigit;
	private readonly StrategyParam<int> _shortSignalBar;
	private readonly StrategyParam<int> _shortStopLossPoints;
	private readonly StrategyParam<int> _shortTakeProfitPoints;
	private readonly StrategyParam<bool> _enableShortOpen;
	private readonly StrategyParam<bool> _enableShortClose;
	private readonly StrategyParam<int> _fatlPeriod;

	private decimal? _longStopPrice;
	private decimal? _longTakePrice;
	private decimal? _shortStopPrice;
	private decimal? _shortTakePrice;

	public ColorJfatlDigitDuplexStrategy()
	{
		_longCandleType = Param(nameof(LongCandleType), TimeSpan.FromHours(4).TimeFrame())
		.SetDisplay("Long Candle Type", "Timeframe for the long indicator", "General");
		_shortCandleType = Param(nameof(ShortCandleType), TimeSpan.FromHours(4).TimeFrame())
		.SetDisplay("Short Candle Type", "Timeframe for the short indicator", "General");

		_longJmaLength = Param(nameof(LongJmaLength), 5)
		.SetGreaterThanZero()
		.SetDisplay("Long JMA Length", "Period of the Jurik moving average for longs", "Indicator");
		_longJmaPhase = Param(nameof(LongJmaPhase), -100)
		.SetDisplay("Long JMA Phase", "Phase adjustment for the Jurik moving average", "Indicator");
		_longAppliedPrice = Param(nameof(LongAppliedPrice), AppliedPrices.Close)
		.SetDisplay("Long Applied Price", "Price source for the long indicator", "Indicator");
		_longDigit = Param(nameof(LongDigit), 2)
		.SetDisplay("Long Rounding Digits", "Number of digits used to round the indicator", "Indicator");
		_longSignalBar = Param(nameof(LongSignalBar), 1)
		.SetDisplay("Long Signal Bar", "Bar shift used to evaluate long signals", "Indicator");
		_longStopLossPoints = Param(nameof(LongStopLossPoints), 1000)
		.SetDisplay("Long Stop Loss (pts)", "Stop loss distance in price steps for long trades", "Risk");
		_longTakeProfitPoints = Param(nameof(LongTakeProfitPoints), 2000)
		.SetDisplay("Long Take Profit (pts)", "Take profit distance in price steps for long trades", "Risk");
		_enableLongOpen = Param(nameof(EnableLongOpen), true)
		.SetDisplay("Enable Long Entries", "Allow opening new long positions", "Trading");
		_enableLongClose = Param(nameof(EnableLongClose), true)
		.SetDisplay("Enable Long Exits", "Allow closing long positions on signals", "Trading");

		_shortJmaLength = Param(nameof(ShortJmaLength), 5)
		.SetGreaterThanZero()
		.SetDisplay("Short JMA Length", "Period of the Jurik moving average for shorts", "Indicator");
		_shortJmaPhase = Param(nameof(ShortJmaPhase), -100)
		.SetDisplay("Short JMA Phase", "Phase adjustment for the Jurik moving average", "Indicator");
		_shortAppliedPrice = Param(nameof(ShortAppliedPrice), AppliedPrices.Close)
		.SetDisplay("Short Applied Price", "Price source for the short indicator", "Indicator");
		_shortDigit = Param(nameof(ShortDigit), 2)
		.SetDisplay("Short Rounding Digits", "Number of digits used to round the indicator", "Indicator");
		_shortSignalBar = Param(nameof(ShortSignalBar), 1)
		.SetDisplay("Short Signal Bar", "Bar shift used to evaluate short signals", "Indicator");
		_shortStopLossPoints = Param(nameof(ShortStopLossPoints), 1000)
		.SetDisplay("Short Stop Loss (pts)", "Stop loss distance in price steps for short trades", "Risk");
		_shortTakeProfitPoints = Param(nameof(ShortTakeProfitPoints), 2000)
		.SetDisplay("Short Take Profit (pts)", "Take profit distance in price steps for short trades", "Risk");
		_enableShortOpen = Param(nameof(EnableShortOpen), true)
		.SetDisplay("Enable Short Entries", "Allow opening new short positions", "Trading");
		_enableShortClose = Param(nameof(EnableShortClose), true)
		.SetDisplay("Enable Short Exits", "Allow closing short positions on signals", "Trading");

		_fatlPeriod = Param(nameof(FatlPeriod), ColorJfatlDigitIndicator.MaxPeriod)
			.SetRange(1, ColorJfatlDigitIndicator.MaxPeriod)
			.SetDisplay("FATL Period", "Number of bars used for the FATL calculation", "Indicator")
			;
	}

	/// <summary>
	/// Timeframe used for the long-side indicator.
	/// </summary>
	public DataType LongCandleType
	{
		get => _longCandleType.Value;
		set => _longCandleType.Value = value;
	}

	/// <summary>
	/// Timeframe used for the short-side indicator.
	/// </summary>
	public DataType ShortCandleType
	{
		get => _shortCandleType.Value;
		set => _shortCandleType.Value = value;
	}

	/// <summary>
	/// Jurik moving average length for the long indicator.
	/// </summary>
	public int LongJmaLength
	{
		get => _longJmaLength.Value;
		set => _longJmaLength.Value = value;
	}

	/// <summary>
	/// Jurik moving average phase for the long indicator.
	/// </summary>
	public int LongJmaPhase
	{
		get => _longJmaPhase.Value;
		set => _longJmaPhase.Value = value;
	}

	/// <summary>
	/// Applied price for the long indicator.
	/// </summary>
	public AppliedPrices LongAppliedPrice
	{
		get => _longAppliedPrice.Value;
		set => _longAppliedPrice.Value = value;
	}

	/// <summary>
	/// Number of digits used to round the long indicator output.
	/// </summary>
	public int LongDigit
	{
		get => _longDigit.Value;
		set => _longDigit.Value = value;
	}

	/// <summary>
	/// Bar shift used when reading long signals.
	/// </summary>
	public int LongSignalBar
	{
		get => _longSignalBar.Value;
		set => _longSignalBar.Value = value;
	}

	/// <summary>
	/// Stop loss distance for long trades measured in price steps.
	/// </summary>
	public int LongStopLossPoints
	{
		get => _longStopLossPoints.Value;
		set => _longStopLossPoints.Value = value;
	}

	/// <summary>
	/// Take profit distance for long trades measured in price steps.
	/// </summary>
	public int LongTakeProfitPoints
	{
		get => _longTakeProfitPoints.Value;
		set => _longTakeProfitPoints.Value = value;
	}

	/// <summary>
	/// Enable or disable new long entries.
	/// </summary>
	public bool EnableLongOpen
	{
		get => _enableLongOpen.Value;
		set => _enableLongOpen.Value = value;
	}

	/// <summary>
	/// Enable or disable long exits generated by the indicator.
	/// </summary>
	public bool EnableLongClose
	{
		get => _enableLongClose.Value;
		set => _enableLongClose.Value = value;
	}

	/// <summary>
	/// Jurik moving average length for the short indicator.
	/// </summary>
	public int ShortJmaLength
	{
		get => _shortJmaLength.Value;
		set => _shortJmaLength.Value = value;
	}

	/// <summary>
	/// Jurik moving average phase for the short indicator.
	/// </summary>
	public int ShortJmaPhase
	{
		get => _shortJmaPhase.Value;
		set => _shortJmaPhase.Value = value;
	}

	/// <summary>
	/// Applied price for the short indicator.
	/// </summary>
	public AppliedPrices ShortAppliedPrice
	{
		get => _shortAppliedPrice.Value;
		set => _shortAppliedPrice.Value = value;
	}

	/// <summary>
	/// Number of digits used to round the short indicator output.
	/// </summary>
	public int ShortDigit
	{
		get => _shortDigit.Value;
		set => _shortDigit.Value = value;
	}

	/// <summary>
	/// Bar shift used when reading short signals.
	/// </summary>
	public int ShortSignalBar
	{
		get => _shortSignalBar.Value;
		set => _shortSignalBar.Value = value;
	}

	/// <summary>
	/// Stop loss distance for short trades measured in price steps.
	/// </summary>
	public int ShortStopLossPoints
	{
		get => _shortStopLossPoints.Value;
		set => _shortStopLossPoints.Value = value;
	}

	/// <summary>
	/// Take profit distance for short trades measured in price steps.
	/// </summary>
	public int ShortTakeProfitPoints
	{
		get => _shortTakeProfitPoints.Value;
		set => _shortTakeProfitPoints.Value = value;
	}

	/// <summary>
	/// Enable or disable new short entries.
	/// </summary>
	public bool EnableShortOpen
	{
		get => _enableShortOpen.Value;
		set => _enableShortOpen.Value = value;
	}

	/// <summary>
	/// Enable or disable short exits generated by the indicator.
	/// </summary>
	public bool EnableShortClose
	{
		get => _enableShortClose.Value;
		set => _enableShortClose.Value = value;
	}

	/// <summary>
	/// Number of bars required to calculate the FATL component.
	/// </summary>
	public int FatlPeriod
	{
		get => _fatlPeriod.Value;
		set => _fatlPeriod.Value = value;
	}

	/// <inheritdoc />
	public override IEnumerable<(Security sec, DataType dt)> GetWorkingSecurities()
	{
		return [(Security, LongCandleType)];
	}

	/// <inheritdoc />
	protected override void OnReseted()
	{
		base.OnReseted();
		_longStopPrice = null;
		_longTakePrice = null;
		_shortStopPrice = null;
		_shortTakePrice = null;
	}

	/// <inheritdoc />
	protected override void OnStarted2(DateTime time)
	{
		base.OnStarted2(time);

		var longIndicator = new ColorJfatlDigitIndicator
		{
			Length = LongJmaLength,
			Phase = LongJmaPhase,
			AppliedPrices = LongAppliedPrice,
			Digit = LongDigit,
			SignalBar = LongSignalBar
		};

		longIndicator.FatlPeriod = FatlPeriod;

		var shortIndicator = new ColorJfatlDigitIndicator
		{
			Length = ShortJmaLength,
			Phase = ShortJmaPhase,
			AppliedPrices = ShortAppliedPrice,
			Digit = ShortDigit,
			SignalBar = ShortSignalBar
		};

		shortIndicator.FatlPeriod = FatlPeriod;

		var longSubscription = SubscribeCandles(LongCandleType);
		longSubscription
		.BindEx(longIndicator, ProcessLongSignal)
		.Start();

		var shortSubscription = SubscribeCandles(ShortCandleType);
		shortSubscription
		.BindEx(shortIndicator, ProcessShortSignal)
		.Start();

		var area = CreateChartArea();
		if (area != null)
		{
			DrawCandles(area, longSubscription);
			DrawIndicator(area, longIndicator);
			DrawIndicator(area, shortIndicator);
			DrawOwnTrades(area);
		}
	}

	private void ProcessLongSignal(ICandleMessage candle, IIndicatorValue indicatorValue)
	{
		if (candle.State != CandleStates.Finished)
		return;

		if (indicatorValue is not ColorJfatlDigitValue value || !value.IsReady)
		return;

		if (CheckLongRisk(candle))
		return;

		var currentColor = value.CurrentColor!.Value;
		var previousColor = value.PreviousColor!.Value;

		if (EnableLongClose && currentColor == 0 && Position > 0)
		{
			CloseCurrentPosition();
			ClearLongRisk();
			return;
		}

		if (EnableLongOpen && currentColor == 2 && previousColor < 2 && Position <= 0)
		{
			OpenLong(candle.ClosePrice);
		}
	}

	private void ProcessShortSignal(ICandleMessage candle, IIndicatorValue indicatorValue)
	{
		if (candle.State != CandleStates.Finished)
		return;

		if (indicatorValue is not ColorJfatlDigitValue value || !value.IsReady)
		return;

		if (CheckShortRisk(candle))
		return;

		var currentColor = value.CurrentColor!.Value;
		var previousColor = value.PreviousColor!.Value;

		if (EnableShortClose && currentColor == 2 && Position < 0)
		{
			CloseCurrentPosition();
			ClearShortRisk();
			return;
		}

		if (EnableShortOpen && currentColor == 0 && previousColor > 0 && Position >= 0)
		{
			OpenShort(candle.ClosePrice);
		}
	}

	private void OpenLong(decimal entryPrice)
	{
		var volume = Volume;
		if (Position < 0)
		volume += Math.Abs(Position);

		if (volume <= 0)
		return;

		BuyMarket();
		SetupLongRisk(entryPrice);
		ClearShortRisk();
	}

	private void OpenShort(decimal entryPrice)
	{
		var volume = Volume;
		if (Position > 0)
		volume += Math.Abs(Position);

		if (volume <= 0)
		return;

		SellMarket();
		SetupShortRisk(entryPrice);
		ClearLongRisk();
	}

	private void SetupLongRisk(decimal entryPrice)
	{
		var step = Security?.PriceStep ?? 1m;
		_longStopPrice = LongStopLossPoints > 0 ? entryPrice - LongStopLossPoints * step : null;
		_longTakePrice = LongTakeProfitPoints > 0 ? entryPrice + LongTakeProfitPoints * step : null;
	}

	private void SetupShortRisk(decimal entryPrice)
	{
		var step = Security?.PriceStep ?? 1m;
		_shortStopPrice = ShortStopLossPoints > 0 ? entryPrice + ShortStopLossPoints * step : null;
		_shortTakePrice = ShortTakeProfitPoints > 0 ? entryPrice - ShortTakeProfitPoints * step : null;
	}

	private bool CheckLongRisk(ICandleMessage candle)
	{
		if (Position <= 0)
		{
			ClearLongRisk();
			return false;
		}

		if (_longStopPrice is decimal stop && candle.LowPrice <= stop)
		{
			CloseCurrentPosition();
			ClearLongRisk();
			return true;
		}

		if (_longTakePrice is decimal take && candle.HighPrice >= take)
		{
			CloseCurrentPosition();
			ClearLongRisk();
			return true;
		}

		return false;
	}

	private bool CheckShortRisk(ICandleMessage candle)
	{
		if (Position >= 0)
		{
			ClearShortRisk();
			return false;
		}

		if (_shortStopPrice is decimal stop && candle.HighPrice >= stop)
		{
			CloseCurrentPosition();
			ClearShortRisk();
			return true;
		}

		if (_shortTakePrice is decimal take && candle.LowPrice <= take)
		{
			CloseCurrentPosition();
			ClearShortRisk();
			return true;
		}

		return false;
	}

	private void ClearLongRisk()
	{
		_longStopPrice = null;
		_longTakePrice = null;
	}

	private void ClearShortRisk()
	{
		_shortStopPrice = null;
		_shortTakePrice = null;
	}

	private void CloseCurrentPosition()
	{
		if (Position > 0)
			SellMarket();
		else if (Position < 0)
			BuyMarket();
	}

	/// <summary>
	/// Applied price options supported by the Color JFATL Digit indicator.
	/// </summary>
	public enum AppliedPrices
	{
		/// <summary>
		/// Close price of the candle.
		/// </summary>
		Close = 1,

		/// <summary>
		/// Open price of the candle.
		/// </summary>
		Open,

		/// <summary>
		/// High price of the candle.
		/// </summary>
		High,

		/// <summary>
		/// Low price of the candle.
		/// </summary>
		Low,

		/// <summary>
		/// Median price (high + low) / 2.
		/// </summary>
		Median,

		/// <summary>
		/// Typical price (close + high + low) / 3.
		/// </summary>
		Typical,

		/// <summary>
		/// Weighted price (2 * close + high + low) / 4.
		/// </summary>
		Weighted,

		/// <summary>
		/// Average of open and close.
		/// </summary>
		Average,

		/// <summary>
		/// Quarter price (open + close + high + low) / 4.
		/// </summary>
		Quarter,

		/// <summary>
		/// Trend-following price (high for bullish candles, low for bearish candles).
		/// </summary>
		TrendFollow0,

		/// <summary>
		/// Trend-following price using half candle body.
		/// </summary>
		TrendFollow1,

		/// <summary>
		/// Demark price formulation.
		/// </summary>
		Demark
	}

	private sealed class ColorJfatlDigitIndicator : BaseIndicator
	{
			private static readonly decimal[] FatlWeights =
		{
			0.4360409450m, 0.3658689069m, 0.2460452079m, 0.1104506886m,
			-0.0054034585m, -0.0760367731m, -0.0933058722m, -0.0670110374m,
			-0.0190795053m, 0.0259609206m, 0.0502044896m, 0.0477818607m,
			0.0249252327m, -0.0047706151m, -0.0272432537m, -0.0338917071m,
			-0.0244141482m, -0.0055774838m, 0.0128149838m, 0.0226522218m,
			0.0208778257m, 0.0100299086m, -0.0036771622m, -0.0136744850m,
			-0.0160483392m, -0.0108597376m, -0.0016060704m, 0.0069480557m,
			0.0110573605m, 0.0095711419m, 0.0040444064m, -0.0023824623m,
			-0.0067093714m, -0.0072003400m, -0.0047717710m, 0.0005541115m,
			0.0007860160m, 0.0130129076m, 0.0040364019m
		};

		public static int MaxPeriod => FatlWeights.Length;

		public int FatlPeriod { get; set; } = MaxPeriod;

		private readonly List<decimal> _priceBuffer = new();
		private readonly List<IndicatorEntry> _history = new();
		private JurikMovingAverage _jma;
		private decimal? _previousRaw;

		public int Length { get; set; } = 5;
		public int Phase { get; set; } = -100;
		public AppliedPrices AppliedPrices { get; set; } = AppliedPrices.Close;
		public int Digit { get; set; } = 2;
		public int SignalBar { get; set; } = 1;

		protected override IIndicatorValue OnProcess(IIndicatorValue input)
		{
			var candle = input.GetValue<ICandleMessage>();
			if (candle == null || candle.State != CandleStates.Finished)
			{
				IsFormed = false;
				return new ColorJfatlDigitValue(this, input.Time, null, null, null);
			}

			var length = Math.Max(1, Length);
			if (_jma == null)
			{
				_jma = new JurikMovingAverage { Length = length };
			}
			else if (_jma.Length != length)
			{
				_jma.Length = length;
				_jma.Reset();
				_priceBuffer.Clear();
				_history.Clear();
				_previousRaw = null;
			}

			var price = GetPrice(candle);
			_priceBuffer.Add(price);

			var fatlPeriod = Math.Max(1, Math.Min(FatlPeriod, MaxPeriod));

			if (_priceBuffer.Count > MaxPeriod)
			_priceBuffer.RemoveAt(0);

			if (_priceBuffer.Count < fatlPeriod)
			{
				IsFormed = false;
				return new ColorJfatlDigitValue(this, candle.OpenTime, null, null, null);
			}

			decimal fatl = 0m;
			for (var i = 0; i < fatlPeriod; i++)
			{
				var priceIndex = _priceBuffer.Count - 1 - i;
				fatl += FatlWeights[i] * _priceBuffer[priceIndex];
			}

			var jmaValue = _jma.Process(new DecimalIndicatorValue(_jma, fatl, candle.CloseTime) { IsFinal = true });
			var baseValue = jmaValue.ToDecimal();
			var adjusted = ApplyPhase(baseValue);
			var rounded = Round(adjusted);
			var color = CalculateColor(rounded);

			_history.Add(new IndicatorEntry(candle.CloseTime, rounded, color));

			var requiredHistory = Math.Max(5, Math.Max(0, SignalBar) + 3);
			if (_history.Count > requiredHistory)
			_history.RemoveRange(0, _history.Count - requiredHistory);

			var signalBar = Math.Max(0, SignalBar);
			if (_history.Count <= signalBar)
			{
				IsFormed = false;
				return new ColorJfatlDigitValue(this, candle.OpenTime, null, null, null);
			}

			var index = _history.Count - 1 - signalBar;
			var entry = _history[index];
			var prevColor = index > 0 ? _history[index - 1].Color : (int?)null;

			if (prevColor == null)
			{
				IsFormed = false;
				return new ColorJfatlDigitValue(this, candle.OpenTime, null, null, null);
			}

			IsFormed = true;
			return new ColorJfatlDigitValue(this, entry.Time, entry.Value, entry.Color, prevColor.Value);
		}

		private decimal GetPrice(ICandleMessage candle)
		{
			var open = candle.OpenPrice;
			var close = candle.ClosePrice;
			var high = candle.HighPrice;
			var low = candle.LowPrice;

			switch (AppliedPrices)
			{
				case AppliedPrices.Close:
				return close;
				case AppliedPrices.Open:
				return open;
				case AppliedPrices.High:
				return high;
				case AppliedPrices.Low:
				return low;
				case AppliedPrices.Median:
				return (high + low) / 2m;
				case AppliedPrices.Typical:
				return (close + high + low) / 3m;
				case AppliedPrices.Weighted:
				return (2m * close + high + low) / 4m;
				case AppliedPrices.Average:
				return (open + close) / 2m;
				case AppliedPrices.Quarter:
				return (open + close + high + low) / 4m;
				case AppliedPrices.TrendFollow0:
				return close > open ? high : close < open ? low : close;
				case AppliedPrices.TrendFollow1:
				return close > open ? (high + close) / 2m : close < open ? (low + close) / 2m : close;
				case AppliedPrices.Demark:
				var res = high + low + close;
				if (close < open)
				res = (res + low) / 2m;
				else if (close > open)
				res = (res + high) / 2m;
				else
				res = (res + close) / 2m;
				return ((res - low) + (res - high)) / 2m;
				default:
				return close;
			}
		}

		private decimal ApplyPhase(decimal baseValue)
		{
			var phase = Phase;
			if (phase > 100)
			phase = 100;
			else if (phase < -100)
			phase = -100;

			var adjusted = baseValue;
			if (_previousRaw is decimal prev)
			{
				var diff = baseValue - prev;
				adjusted = baseValue + diff * (phase / 100m);
			}

			_previousRaw = baseValue;
			return adjusted;
		}

		private decimal Round(decimal value)
		{
			if (Digit < 0)
			return value;

			return Math.Round(value, Digit, MidpointRounding.AwayFromZero);
		}

		private int CalculateColor(decimal currentValue)
		{
			if (_history.Count == 0)
			return 1;

			var previous = _history[^1];
			var diff = currentValue - previous.Value;
			if (diff > 0m)
			return 2;
			if (diff < 0m)
			return 0;
			return previous.Color;
		}

		public override void Reset()
		{
			base.Reset();
			_priceBuffer.Clear();
			_history.Clear();
			_previousRaw = null;
			_jma?.Reset();
			IsFormed = false;
		}
	}

	private sealed record IndicatorEntry(DateTime Time, decimal Value, int Color);

	private sealed class ColorJfatlDigitValue : BaseIndicatorValue
	{
		public ColorJfatlDigitValue(IIndicator indicator, DateTime time, decimal? value, int? currentColor, int? previousColor)
		: base(indicator, time)
		{
			Value = value;
			CurrentColor = currentColor;
			PreviousColor = previousColor;
		}

		public decimal? Value { get; }
		public int? CurrentColor { get; }
		public int? PreviousColor { get; }
		public bool IsReady => Value.HasValue && CurrentColor.HasValue && PreviousColor.HasValue;

		public override bool IsEmpty { get; set; }
		public override bool IsFinal { get; set; } = true;

		public override T GetValue<T>(Level1Fields? field)
		{
			if (Value.HasValue && typeof(T) == typeof(decimal))
				return (T)(object)Value.Value;
			return default!;
		}

		public override int CompareTo(IIndicatorValue other)
		{
			if (other is ColorJfatlDigitValue o && Value.HasValue && o.Value.HasValue)
				return Value.Value.CompareTo(o.Value.Value);
			return 0;
		}

		public override IEnumerable<object> ToValues()
		{
			yield return Value ?? 0m;
			yield return CurrentColor ?? 0;
			yield return PreviousColor ?? 0;
		}

		public override void FromValues(object[] values) { }
	}
}