Auf GitHub ansehen

ChandelExit Wiedereinstiegs-Strategie

Diese Strategie portiert den MetaTrader-Experten "Exp_ChandelExitSign_ReOpen" zur StockSharp High-Level-API. Sie handelt Ausbrüche mit den Chandelier-Exit-Bändern und öffnet Positionen automatisch erneut, wenn der Trend anhält. Das System reagiert auf Indikatorsignale, die auf einem konfigurierbaren höheren Zeitrahmen berechnet werden, und verwaltet dabei das Risiko mit ATR-basierten Stops und optionalen Take-Profit-Niveaus.

Die Kernidee besteht darin, den Chandelier Exit sowohl als Trendfilter als auch als dynamische Trailing-Barriere zu verwenden. Wenn das untere Band das obere Band kreuzt, wird ein bullischer Impuls erkannt; wenn das Gegenteil geschieht, erscheint ein bearischer Impuls. Die Strategie kann symmetrisch auf Long- und Short-Seiten arbeiten, und jedes Signal kann einzeln über Parameter aktiviert oder deaktiviert werden. Nach dem Einstieg muss sich der Preis um eine Anzahl von Kursschritten (PriceStepPoints) vorwärts bewegen, bevor eine Zusatzorder erlaubt ist. Die Zusätze imitieren das ursprüngliche Expertenverhaltensberater-Verhalten und sind durch MaxAdditions begrenzt, um unkontrollierte Positionsgrößen zu verhindern.

Handelslogik

  • Signalberechnung
    • RangePeriod Bars (verschoben um Shift) definieren das höchste Hoch und tiefste Tief, das von den Chandelier-Exit-Bändern verwendet wird.
    • AtrPeriod zusammen mit AtrMultiplier erzeugen einen Volatilitätspuffer, der die Ausstiegsbänder vom Preis wegschiebt.
    • SignalBar (Standard 1) verzögert die Ausführung, sodass die Strategie auf der vorherigen abgeschlossenen Kerze agiert und die MT5-Implementierung repliziert.
  • Einstiege
    • Long: ausgelöst, wenn das untere Band das obere Band kreuzt (IsUpSignal). Erfordert EnableBuyEntries = true. Wenn eine Short-Position besteht, versucht die Strategie zunächst, sie zu schließen, wenn EnableSellExits = true.
    • Short: ausgelöst, wenn die Bänder in der entgegengesetzten Richtung kreuzen (IsDownSignal) und EnableSellEntries = true. Bestehende Longs werden nur geschlossen, wenn EnableBuyExits = true.
  • Ausstiege
    • Long-Positionen schließen bei bearischen Signalen, wenn EnableBuyExits = true, oder wenn Schutz-Stops/-Targets erreicht werden.
    • Short-Positionen schließen bei bullischen Signalen, wenn EnableSellExits = true, oder durch Schutzniveaus.
    • Die Strategie scannt auch ältere Indikatorwerte, wenn sowohl Ein- als auch Ausstieg-Schalter aktiviert sind, um sicherzustellen, dass ein Schließsignal verfügbar ist, auch wenn die jüngste Kerze nur einen Einstieg erzeugte.
  • Wiedereinstieg / Aufstockung
    • Nach jedem Einstieg wird der letzte Füllpreis gespeichert. Wenn sich der Preis um mindestens PriceStepPoints * PriceStep in Gunst des Trades bewegt, wird eine zusätzliche Order der Größe Volume gesendet, bis zu MaxAdditions mal.
    • Jede Aufstockung setzt die Stop-/Take-Berechnungen auf den neuesten Füllwert zurück, damit der Schutz nahe der neuesten Exposition bleibt.
  • Risikomanagement
    • StopLossPoints und TakeProfitPoints drücken Abstände in Kursschritten vom letzten Füllwert aus. Stops und Targets sind optional; auf null setzen zum Deaktivieren.
    • Alle Schutzprüfungen laufen bei jeder abgeschlossenen Kerze. Wenn der Preis intrabar einen Stop oder Target verletzt, wird die Position zu Marktpreisen geschlossen.

Standardparameter

Parameter Standard Beschreibung
CandleType TimeSpan.FromHours(4).TimeFrame() Zeitrahmen für Indikatorberechnungen.
RangePeriod 15 Beobachtungsfenster für das höchste Hoch / tiefste Tief.
Shift 1 Anzahl der kürzlichen Bars, die vor der Bereichsberechnung übersprungen werden.
AtrPeriod 14 ATR-Länge für den Volatilitätspuffer.
AtrMultiplier 4 ATR-Multiplikator, der auf den Puffer angewendet wird.
SignalBar 1 Wie viele abgeschlossene Bars zurück das Signal gelesen wird.
PriceStepPoints 300 Minimale günstige Bewegung in Kursschritten vor Aufstockung.
MaxAdditions 10 Maximale Anzahl von Zusatzorders nach dem Ersteinstieg.
StopLossPoints 1000 Stop-Loss-Abstand in Kursschritten.
TakeProfitPoints 2000 Take-Profit-Abstand in Kursschritten.
EnableBuyEntries / EnableSellEntries true Öffnen von Long/Short-Trades bei Signalen erlauben.
EnableBuyExits / EnableSellExits true Schließen von Long/Short-Trades bei entgegengesetzten Signalen erlauben.

Praktische Hinweise

  • Die Strategie verlässt sich auf Volume zur Definition der Basisordergröße. Zusatztrades verwenden dieselbe Größe. Volume oder MaxAdditions anpassen, um Risikolimits einzuhalten.
  • Da Wiedereinstiege eine in Kursschritten ausgedrückte Bewegung erfordern, sicherstellen, dass die Wertpapier-Metadaten (PriceStep) korrekt konfiguriert sind. Instrumente mit großen Punktwerten benötigen möglicherweise andere Standardwerte.
  • SignalBar kann auf null gesetzt werden, um auf der zuletzt abgeschlossenen Kerze zu agieren, aber der ursprüngliche Experte verwendete eine Ein-Bar-Verzögerung, um nicht auf der Kerze zu handeln, die das Signal generiert hat.
  • Die Strategie auf einer Symbol-/Portfolio-Kombination starten, die sowohl Long- als auch Short-Trades unterstützt. Die integrierten Parameter-Schalter verwenden, um sie auf eine Richtung zu beschränken, falls nötig.
  • Chart-Helfer (DrawCandles, DrawIndicator, DrawOwnTrades) aktivieren sich automatisch, wenn ein Chartbereich verfügbar ist, was die Visualisierung von Bändern und Füllungen erleichtert.

Beispiel-Workflow

  1. Auf einen bullischen Kreuzer warten: das untere Band bricht auf der höheren Zeitrahmen-Kerze über das obere Band.
  2. Wenn keine Position besteht und Long-Einstiege aktiviert sind, eine Markt-Kauforder der Größe Volume platzieren. Stops und Targets werden relativ zum Füllpreis gesetzt.
  3. Wenn sich der Preis um mindestens PriceStepPoints * PriceStep erhöht, eine weitere Kauforder senden (dabei MaxAdditions respektieren).
  4. Den gesamten Long schließen, wenn ein bearisches Signal erscheint, der Stop-Loss erreicht wird oder der Take-Profit erreicht wird. Der Prozess ist für Short-Trades gespiegelt.

Diese Dokumentation spiegelt die ursprüngliche MT5-Strategie wider, während sie StockSharp-Konventionen wie Strategieparameter, High-Level-Kerzenabonnements und explizites Positionsmanagement übernimmt.

using System;
using System.Linq;
using System.Collections.Generic;

using Ecng.Common;
using Ecng.Collections;
using Ecng.Serialization;

using StockSharp.Algo.Indicators;
using StockSharp.Algo.Strategies;
using StockSharp.BusinessEntities;
using StockSharp.Messages;

namespace StockSharp.Samples.Strategies;

/// <summary>
/// Strategy converted from the ChandelExitSign expert advisor with re-entry logic.
/// </summary>
public class ChandelExitReopenStrategy : Strategy
{
	private readonly StrategyParam<DataType> _candleType;
	private readonly StrategyParam<int> _rangePeriod;
	private readonly StrategyParam<int> _shift;
	private readonly StrategyParam<int> _atrPeriod;
	private readonly StrategyParam<decimal> _atrMultiplier;
	private readonly StrategyParam<int> _signalBar;
	private readonly StrategyParam<decimal> _priceStepPoints;
	private readonly StrategyParam<int> _maxAdditions;
	private readonly StrategyParam<int> _stopLossPoints;
	private readonly StrategyParam<int> _takeProfitPoints;
	private readonly StrategyParam<bool> _enableBuyEntries;
	private readonly StrategyParam<bool> _enableSellEntries;
	private readonly StrategyParam<bool> _enableBuyExits;
	private readonly StrategyParam<bool> _enableSellExits;

	private readonly List<CandleInfo> _history = new();
	private readonly List<SignalInfo> _signals = new();

	private decimal? _previousUp;
	private decimal? _previousDown;
	private int _direction;

	private int _longAdditions;
	private int _shortAdditions;
	private decimal? _longEntryPrice;
	private decimal? _shortEntryPrice;
	private decimal? _longStopPrice;
	private decimal? _shortStopPrice;
	private decimal? _longTakePrice;
	private decimal? _shortTakePrice;
	private DateTimeOffset? _lastLongAdditionTime;
	private DateTimeOffset? _lastShortAdditionTime;

	/// <summary>
	/// Initializes a new instance of <see cref="ChandelExitReopenStrategy"/>.
	/// </summary>
	public ChandelExitReopenStrategy()
	{
		_candleType = Param(nameof(CandleType), TimeSpan.FromHours(4).TimeFrame())
			.SetDisplay("Candle Type", "Type of candles used for signals", "General");

		_rangePeriod = Param(nameof(RangePeriod), 15)
			.SetDisplay("Range Period", "Lookback for highest high and lowest low", "Indicator")
			.SetGreaterThanZero()
			;

		_shift = Param(nameof(Shift), 1)
			.SetDisplay("Shift", "Bars to skip from the most recent data", "Indicator")
			.SetNotNegative()
			;

		_atrPeriod = Param(nameof(AtrPeriod), 14)
			.SetDisplay("ATR Period", "ATR length for volatility filter", "Indicator")
			.SetGreaterThanZero()
			;

		_atrMultiplier = Param(nameof(AtrMultiplier), 4m)
			.SetDisplay("ATR Multiplier", "Multiplier applied to ATR", "Indicator")
			.SetGreaterThanZero()
			;

		_signalBar = Param(nameof(SignalBar), 1)
			.SetDisplay("Signal Bar", "How many bars back to read signals", "Trading")
			.SetNotNegative();

		_priceStepPoints = Param(nameof(PriceStepPoints), 1000m)
			.SetDisplay("Re-entry Distance", "Minimum favorable move in price steps before adding", "Position Management")
			.SetNotNegative()
			;

		_maxAdditions = Param(nameof(MaxAdditions), 1)
			.SetDisplay("Max Additions", "Maximum number of re-entries after the initial position", "Position Management")
			.SetNotNegative();

		_stopLossPoints = Param(nameof(StopLossPoints), 1000)
			.SetDisplay("Stop Loss Points", "Stop-loss distance in price steps", "Risk Management")
			.SetNotNegative();

		_takeProfitPoints = Param(nameof(TakeProfitPoints), 2000)
			.SetDisplay("Take Profit Points", "Take-profit distance in price steps", "Risk Management")
			.SetNotNegative();

		_enableBuyEntries = Param(nameof(EnableBuyEntries), true)
			.SetDisplay("Enable Long Entries", "Allow opening long positions on up signals", "Trading");

		_enableSellEntries = Param(nameof(EnableSellEntries), true)
			.SetDisplay("Enable Short Entries", "Allow opening short positions on down signals", "Trading");

		_enableBuyExits = Param(nameof(EnableBuyExits), true)
			.SetDisplay("Enable Long Exits", "Allow closing long positions on down signals", "Trading");

		_enableSellExits = Param(nameof(EnableSellExits), true)
			.SetDisplay("Enable Short Exits", "Allow closing short positions on up signals", "Trading");
	}

	/// <summary>
	/// Candle type used for calculations.
	/// </summary>
	public DataType CandleType
	{
		get => _candleType.Value;
		set => _candleType.Value = value;
	}

	/// <summary>
	/// Range length for the Chandelier exit bands.
	/// </summary>
	public int RangePeriod
	{
		get => _rangePeriod.Value;
		set => _rangePeriod.Value = value;
	}

	/// <summary>
	/// Number of the most recent bars skipped before measuring the range.
	/// </summary>
	public int Shift
	{
		get => _shift.Value;
		set => _shift.Value = value;
	}

	/// <summary>
	/// ATR length used in the signal calculation.
	/// </summary>
	public int AtrPeriod
	{
		get => _atrPeriod.Value;
		set => _atrPeriod.Value = value;
	}

	/// <summary>
	/// Multiplier applied to the ATR value.
	/// </summary>
	public decimal AtrMultiplier
	{
		get => _atrMultiplier.Value;
		set => _atrMultiplier.Value = value;
	}

	/// <summary>
	/// Offset of the signal bar relative to the latest finished candle.
	/// </summary>
	public int SignalBar
	{
		get => _signalBar.Value;
		set => _signalBar.Value = value;
	}

	/// <summary>
	/// Required move in price steps before another position add is allowed.
	/// </summary>
	public decimal PriceStepPoints
	{
		get => _priceStepPoints.Value;
		set => _priceStepPoints.Value = value;
	}

	/// <summary>
	/// Maximum number of additional entries after the first fill.
	/// </summary>
	public int MaxAdditions
	{
		get => _maxAdditions.Value;
		set => _maxAdditions.Value = value;
	}

	/// <summary>
	/// Stop-loss distance expressed in price steps.
	/// </summary>
	public int StopLossPoints
	{
		get => _stopLossPoints.Value;
		set => _stopLossPoints.Value = value;
	}

	/// <summary>
	/// Take-profit distance expressed in price steps.
	/// </summary>
	public int TakeProfitPoints
	{
		get => _takeProfitPoints.Value;
		set => _takeProfitPoints.Value = value;
	}

	/// <summary>
	/// Enables long entries generated by the up buffer.
	/// </summary>
	public bool EnableBuyEntries
	{
		get => _enableBuyEntries.Value;
		set => _enableBuyEntries.Value = value;
	}

	/// <summary>
	/// Enables short entries generated by the down buffer.
	/// </summary>
	public bool EnableSellEntries
	{
		get => _enableSellEntries.Value;
		set => _enableSellEntries.Value = value;
	}

	/// <summary>
	/// Enables long exits on down signals.
	/// </summary>
	public bool EnableBuyExits
	{
		get => _enableBuyExits.Value;
		set => _enableBuyExits.Value = value;
	}

	/// <summary>
	/// Enables short exits on up signals.
	/// </summary>
	public bool EnableSellExits
	{
		get => _enableSellExits.Value;
		set => _enableSellExits.Value = value;
	}

	/// <inheritdoc />
	public override IEnumerable<(Security sec, DataType dt)> GetWorkingSecurities()
	{
		return [(Security, CandleType)];
	}

	/// <inheritdoc />
	protected override void OnReseted()
	{
		base.OnReseted();

		_history.Clear();
		_signals.Clear();

		_previousUp = null;
		_previousDown = null;
		_direction = 0;

		ResetLongState();
		ResetShortState();
	}

	/// <inheritdoc />
	protected override void OnStarted2(DateTime time)
	{
		base.OnStarted2(time);

		var atr = new AverageTrueRange { Length = AtrPeriod };
		var subscription = SubscribeCandles(CandleType);

		subscription
			.BindEx(atr, ProcessCandle)
			.Start();

		var area = CreateChartArea();
		if (area != null)
		{
			DrawCandles(area, subscription);
			DrawIndicator(area, atr);
			DrawOwnTrades(area);
		}
	}

	private void ProcessCandle(ICandleMessage candle, IIndicatorValue atrValue)
	{
		if (candle.State != CandleStates.Finished)
			return;

		var atr = atrValue.IsFinal ? atrValue.ToDecimal() : 0m;
		var info = new CandleInfo(candle.OpenTime, candle.HighPrice, candle.LowPrice, candle.ClosePrice, atr);

		_history.Add(info);

		SignalInfo signal;
		if (atrValue.IsFinal)
		{
			signal = CalculateSignal(info);
		}
		else
		{
			signal = SignalInfo.Empty(info.Time);
		}

		_signals.Add(signal);
		TrimCache();

		if (!atrValue.IsFinal)
			return;

		if (_signals.Count <= SignalBar)
			return;

		var signals = _signals.ToArray();
		var targetIndex = signals.Length - 1 - SignalBar;
		if (targetIndex < 0)
			return;

		var targetSignal = signals[targetIndex];
		if (targetSignal is null)
			return;

		var buyOpen = targetSignal.IsUpSignal && EnableBuyEntries;
		var sellOpen = targetSignal.IsDownSignal && EnableSellEntries;
		var buyClose = targetSignal.IsDownSignal && EnableBuyExits;
		var sellClose = targetSignal.IsUpSignal && EnableSellExits;

		if (((EnableBuyEntries && EnableBuyExits) || (EnableSellEntries && EnableSellExits)) && !buyClose && !sellClose)
		{
			for (var idx = targetIndex - 1; idx >= 0; idx--)
			{
				var previousSignal = signals[idx];
				if (previousSignal is null)
					continue;

				if (!sellClose && EnableSellExits && previousSignal.IsUpSignal)
				{
					sellClose = true;
					break;
				}

				if (!buyClose && EnableBuyExits && previousSignal.IsDownSignal)
				{
					buyClose = true;
					break;
				}
			}
		}

		var step = Security.PriceStep ?? 1m;
		var priceStep = PriceStepPoints * step;

		var longClosed = false;
		var shortClosed = false;

		if (Position > 0m)
		{
			if (_longStopPrice is decimal sl && candle.LowPrice <= sl)
			{
				SellMarket();
				ResetLongState();
				longClosed = true;
				this.LogInfo($"Long stop triggered at {sl:0.########}");
			}
			else if (_longTakePrice is decimal tp && candle.HighPrice >= tp)
			{
				SellMarket();
				ResetLongState();
				longClosed = true;
				this.LogInfo($"Long take profit triggered at {tp:0.########}");
			}
		}

		if (Position < 0m)
		{
			if (_shortStopPrice is decimal sl && candle.HighPrice >= sl)
			{
				BuyMarket();
				ResetShortState();
				shortClosed = true;
				this.LogInfo($"Short stop triggered at {sl:0.########}");
			}
			else if (_shortTakePrice is decimal tp && candle.LowPrice <= tp)
			{
				BuyMarket();
				ResetShortState();
				shortClosed = true;
				this.LogInfo($"Short take profit triggered at {tp:0.########}");
			}
		}

		if (!longClosed && buyClose && Position > 0m)
		{
			SellMarket();
			ResetLongState();
			longClosed = true;
			this.LogInfo($"Long exit on down signal at {candle.ClosePrice:0.########}");
		}

		if (!shortClosed && sellClose && Position < 0m)
		{
			BuyMarket();
			ResetShortState();
			shortClosed = true;
			this.LogInfo($"Short exit on up signal at {candle.ClosePrice:0.########}");
		}

		if (!longClosed && Position > 0m && MaxAdditions > 0 && _longEntryPrice is decimal lastLongPrice && priceStep > 0m && _longAdditions < MaxAdditions)
		{
			if (candle.ClosePrice - lastLongPrice >= priceStep && _lastLongAdditionTime != candle.OpenTime)
			{
				if (Volume > 0m)
				{
					BuyMarket();
					_longAdditions++;
					_longEntryPrice = candle.ClosePrice;
					_lastLongAdditionTime = candle.OpenTime;
					UpdateLongProtection(candle.ClosePrice, step);
					this.LogInfo($"Added to long position at {candle.ClosePrice:0.########} (add #{_longAdditions})");
				}
			}
		}

		if (!shortClosed && Position < 0m && MaxAdditions > 0 && _shortEntryPrice is decimal lastShortPrice && priceStep > 0m && _shortAdditions < MaxAdditions)
		{
			if (lastShortPrice - candle.ClosePrice >= priceStep && _lastShortAdditionTime != candle.OpenTime)
			{
				if (Volume > 0m)
				{
					SellMarket();
					_shortAdditions++;
					_shortEntryPrice = candle.ClosePrice;
					_lastShortAdditionTime = candle.OpenTime;
					UpdateShortProtection(candle.ClosePrice, step);
					this.LogInfo($"Added to short position at {candle.ClosePrice:0.########} (add #{_shortAdditions})");
				}
			}
		}

		if (buyOpen && Position < 0m && !EnableSellExits)
		buyOpen = false;

		if (sellOpen && Position > 0m && !EnableBuyExits)
		sellOpen = false;

		if (buyOpen && Volume > 0m)
		{
			BuyMarket();
			ResetShortState();
			_longAdditions = 0;
			_longEntryPrice = candle.ClosePrice;
			_lastLongAdditionTime = candle.OpenTime;
			UpdateLongProtection(candle.ClosePrice, step);
			this.LogInfo($"Opened long position at {candle.ClosePrice:0.########}");
		}

		if (sellOpen && Volume > 0m)
		{
			SellMarket();
			ResetLongState();
			_shortAdditions = 0;
			_shortEntryPrice = candle.ClosePrice;
			_lastShortAdditionTime = candle.OpenTime;
			UpdateShortProtection(candle.ClosePrice, step);
			this.LogInfo($"Opened short position at {candle.ClosePrice:0.########}");
		}
	}

	private void TrimCache()
	{
		var maxItems = Math.Max(RangePeriod + Shift + 5, SignalBar + 5) + 50;
		if (_history.Count <= maxItems)
			return;

		var removeCount = _history.Count - maxItems;
		_history.RemoveRange(0, removeCount);
		_signals.RemoveRange(0, removeCount);
	}

	private SignalInfo CalculateSignal(CandleInfo current)
	{
		var history = _history.ToArray();
		var currentIndex = history.Length - 1;
		var range = RangePeriod;
		var shift = Shift;

		if (range <= 0 || currentIndex - shift < 0)
		return SignalInfo.Empty(current.Time);

		var windowEnd = currentIndex - shift;
		var windowStart = windowEnd - (range - 1);

		if (windowStart < 0 || windowEnd >= history.Length)
		return SignalInfo.Empty(current.Time);

		var highestHigh = decimal.MinValue;
		var lowestLow = decimal.MaxValue;

		for (var i = windowStart; i <= windowEnd; i++)
		{
			var item = history[i];
			if (item is null)
				continue;

			if (item.High > highestHigh)
			highestHigh = item.High;
			if (item.Low < lowestLow)
			lowestLow = item.Low;
		}

		if (highestHigh == decimal.MinValue || lowestLow == decimal.MaxValue)
			return SignalInfo.Empty(current.Time);

		var atr = current.Atr * AtrMultiplier;
		var upperBand = highestHigh - atr;
		var lowerBand = lowestLow + atr;

		decimal up;
		decimal down;

		if (_direction >= 0)
		{
			if (current.Close < upperBand)
			{
				_direction = -1;
				up = lowerBand;
				down = upperBand;
			}
			else
			{
				up = upperBand;
				down = lowerBand;
			}
		}
		else
		{
			if (current.Close > lowerBand)
			{
				_direction = 1;
				down = lowerBand;
				up = upperBand;
			}
			else
			{
				up = lowerBand;
				down = upperBand;
			}
		}

		var isUpSignal = false;
		var isDownSignal = false;

		if (_previousDown is decimal prevDn && _previousUp is decimal prevUp)
		{
			if (prevDn <= prevUp && down > up)
			isUpSignal = true;

			if (prevDn >= prevUp && down < up)
			isDownSignal = true;
		}

		_previousUp = up;
		_previousDown = down;

		return new SignalInfo(current.Time, isUpSignal, isDownSignal, up, down);
	}

	private void UpdateLongProtection(decimal entryPrice, decimal step)
	{
		_longStopPrice = StopLossPoints > 0 ? entryPrice - StopLossPoints * step : null;
		_longTakePrice = TakeProfitPoints > 0 ? entryPrice + TakeProfitPoints * step : null;
	}

	private void UpdateShortProtection(decimal entryPrice, decimal step)
	{
		_shortStopPrice = StopLossPoints > 0 ? entryPrice + StopLossPoints * step : null;
		_shortTakePrice = TakeProfitPoints > 0 ? entryPrice - TakeProfitPoints * step : null;
	}

	private void ResetLongState()
	{
		_longAdditions = 0;
		_longEntryPrice = null;
		_longStopPrice = null;
		_longTakePrice = null;
		_lastLongAdditionTime = null;
	}

	private void ResetShortState()
	{
		_shortAdditions = 0;
		_shortEntryPrice = null;
		_shortStopPrice = null;
		_shortTakePrice = null;
		_lastShortAdditionTime = null;
	}

	private sealed record CandleInfo(DateTimeOffset Time, decimal High, decimal Low, decimal Close, decimal Atr);

	private sealed record SignalInfo(DateTimeOffset Time, bool IsUpSignal, bool IsDownSignal, decimal Up, decimal Down)
	{
		public static SignalInfo Empty(DateTimeOffset time) => new(time, false, false, 0m, 0m);
	}
}