Deutsch
Auf GitHub ansehen

Strategie Keltner Macd

Strategie basierend auf Keltner Channels und MACD. Geht long, wenn der Preis über den oberen Keltner Channel ausbricht und MACD > Signal. Geht short, wenn der Preis unter den unteren Keltner Channel ausbricht und MACD < Signal. Ausstieg, wenn MACD seine Signallinie in der entgegengesetzten Richtung kreuzt.

Tests zeigen eine durchschnittliche jährliche Rendite von etwa 169%. Sie funktioniert am besten auf dem Kryptomarkt.

Keltner Channel-Ausbrüche dienen als Auslöser, und MACD-Momentum filtert die Richtung. Die Strategie initiiert Trades, sobald beide Signale übereinstimmen.

Gut für Trader, die Volatilitätsexpansionen mit Momentum-Rückenwind verfolgen. Ein ATR-basierter Stop begrenzt das Risiko.

Details

  • Einstiegskriterien:
    • Long: Close > UpperBand && MACD > Signal
    • Short: Close < LowerBand && MACD < Signal
  • Long/Short: Beide
  • Ausstiegskriterien: MACD-Kreuzung in entgegengesetzter Richtung
  • Stops: ATR-basiert mit AtrMultiplier
  • Standardwerte:
    • EmaPeriod = 20
    • Multiplier = 2m
    • AtrPeriod = 14
    • MacdFastPeriod = 12
    • MacdSlowPeriod = 26
    • MacdSignalPeriod = 9
    • AtrMultiplier = 2m
    • CandleType = TimeSpan.FromMinutes(15).TimeFrame() Der Kanal ist der EMA plus und minus Multiplier ATR. Der Stop liegt AtrMultiplier ATR vom Einstiegsschluss entfernt und wird auf Kerzenschlüssen geprüft. Ein Einstiegssignal gegen eine offene Position dreht sie.
  • Filter:
    • Kategorie: Mean Reversion
    • Richtung: Beide
    • Indikatoren: Keltner Channel, MACD
    • Stops: Ja
    • Komplexität: Mittel
    • Zeitrahmen: Mittelfristig
    • Saisonalität: Nein
    • Neuronale Netze: Nein
    • Divergenz: Nein
    • Risikolevel: Mittel
using System;
using System.Collections.Generic;

using Ecng.Common;

using StockSharp.Algo.Indicators;
using StockSharp.Algo.Strategies;
using StockSharp.BusinessEntities;
using StockSharp.Messages;

namespace StockSharp.Samples.Strategies;

/// <summary>
/// Keltner MACD strategy.
/// The Keltner Channel is the EmaPeriod EMA plus and minus Multiplier times the AtrPeriod ATR. A close above the upper band with MACD above
/// its signal line goes long and a close below the lower band with MACD below the signal line goes short, reversing an opposite position.
/// A long closes when MACD crosses below the signal line and a short when it crosses above it. The stop lies AtrMultiplier ATR from the entry
/// close and is checked on candle closes.
/// </summary>
public class KeltnerMacdStrategy : Strategy
{
	private readonly StrategyParam<int> _emaPeriod;
	private readonly StrategyParam<decimal> _multiplier;
	private readonly StrategyParam<int> _atrPeriod;
	private readonly StrategyParam<int> _macdFastPeriod;
	private readonly StrategyParam<int> _macdSlowPeriod;
	private readonly StrategyParam<int> _macdSignalPeriod;
	private readonly StrategyParam<decimal> _atrMultiplier;
	private readonly StrategyParam<DataType> _candleType;

	private decimal _stopPrice;

	/// <summary>
	/// Period of the channel EMA.
	/// </summary>
	public int EmaPeriod
	{
		get => _emaPeriod.Value;
		set => _emaPeriod.Value = value;
	}

	/// <summary>
	/// ATR multiplier of the channel width.
	/// </summary>
	public decimal Multiplier
	{
		get => _multiplier.Value;
		set => _multiplier.Value = value;
	}

	/// <summary>
	/// Period of the channel and stop ATR.
	/// </summary>
	public int AtrPeriod
	{
		get => _atrPeriod.Value;
		set => _atrPeriod.Value = value;
	}

	/// <summary>
	/// Fast EMA period of MACD.
	/// </summary>
	public int MacdFastPeriod
	{
		get => _macdFastPeriod.Value;
		set => _macdFastPeriod.Value = value;
	}

	/// <summary>
	/// Slow EMA period of MACD.
	/// </summary>
	public int MacdSlowPeriod
	{
		get => _macdSlowPeriod.Value;
		set => _macdSlowPeriod.Value = value;
	}

	/// <summary>
	/// Signal line period of MACD.
	/// </summary>
	public int MacdSignalPeriod
	{
		get => _macdSignalPeriod.Value;
		set => _macdSignalPeriod.Value = value;
	}

	/// <summary>
	/// Stop distance from the entry in ATRs.
	/// </summary>
	public decimal AtrMultiplier
	{
		get => _atrMultiplier.Value;
		set => _atrMultiplier.Value = value;
	}

	/// <summary>
	/// Candle type.
	/// </summary>
	public DataType CandleType
	{
		get => _candleType.Value;
		set => _candleType.Value = value;
	}

	/// <summary>
	/// Constructor.
	/// </summary>
	public KeltnerMacdStrategy()
	{
		_emaPeriod = Param(nameof(EmaPeriod), 20)
			.SetGreaterThanZero()
			.SetDisplay("EMA Period", "Period of the channel EMA", "Keltner");

		_multiplier = Param(nameof(Multiplier), 2m)
			.SetGreaterThanZero()
			.SetDisplay("Multiplier", "ATR multiplier of the channel width", "Keltner");

		_atrPeriod = Param(nameof(AtrPeriod), 14)
			.SetGreaterThanZero()
			.SetDisplay("ATR Period", "Period of the channel and stop ATR", "Keltner");

		_macdFastPeriod = Param(nameof(MacdFastPeriod), 12)
			.SetGreaterThanZero()
			.SetDisplay("MACD Fast", "Fast EMA period of MACD", "MACD");

		_macdSlowPeriod = Param(nameof(MacdSlowPeriod), 26)
			.SetGreaterThanZero()
			.SetDisplay("MACD Slow", "Slow EMA period of MACD", "MACD");

		_macdSignalPeriod = Param(nameof(MacdSignalPeriod), 9)
			.SetGreaterThanZero()
			.SetDisplay("MACD Signal", "Signal line period of MACD", "MACD");

		_atrMultiplier = Param(nameof(AtrMultiplier), 2m)
			.SetNotNegative()
			.SetDisplay("ATR Multiplier", "Stop distance from the entry in ATRs", "Risk");

		_candleType = Param(nameof(CandleType), TimeSpan.FromMinutes(15).TimeFrame())
			.SetDisplay("Candle Type", "Type of candles to use", "General");
	}

	/// <inheritdoc />
	public override IEnumerable<(Security sec, DataType dt)> GetWorkingSecurities()
	{
		return [(Security, CandleType)];
	}

	/// <inheritdoc />
	protected override void OnReseted()
	{
		base.OnReseted();
		_stopPrice = default;
	}

	/// <inheritdoc />
	protected override void OnStarted2(DateTime time)
	{
		base.OnStarted2(time);

		_stopPrice = default;

		var ema = new ExponentialMovingAverage { Length = EmaPeriod };
		var atr = new AverageTrueRange { Length = AtrPeriod };
		var macd = new MovingAverageConvergenceDivergenceSignal
		{
			Macd =
			{
				ShortMa = { Length = MacdFastPeriod },
				LongMa = { Length = MacdSlowPeriod },
			},
			SignalMa = { Length = MacdSignalPeriod }
		};

		var subscription = SubscribeCandles(CandleType);
		subscription
			.BindEx(ema, atr, macd, ProcessCandle)
			.Start();

		var area = CreateChartArea();
		if (area != null)
		{
			DrawCandles(area, subscription);
			DrawIndicator(area, ema);
			DrawOwnTrades(area);

			var oscillators = CreateChartArea();
			if (oscillators != null)
			{
				DrawIndicator(oscillators, macd);
			}
		}
	}

	private void ProcessCandle(ICandleMessage candle, IIndicatorValue emaValue, IIndicatorValue atrValue, IIndicatorValue macdValue)
	{
		if (candle.State != CandleStates.Finished)
			return;

		if (!emaValue.IsFormed || !atrValue.IsFormed || !macdValue.IsFormed)
			return;

		var macdTyped = (MovingAverageConvergenceDivergenceSignalValue)macdValue;

		if (macdTyped.Macd is not decimal macd || macdTyped.Signal is not decimal signal)
			return;

		if (!IsFormedAndOnlineAndAllowTrading())
			return;

		var middle = emaValue.GetValue<decimal>();
		var atr = atrValue.GetValue<decimal>();
		var upper = middle + Multiplier * atr;
		var lower = middle - Multiplier * atr;
		var close = candle.ClosePrice;

		if (close > upper && macd > signal && Position <= 0)
		{
			BuyMarket(Volume + Math.Abs(Position));
			_stopPrice = close - AtrMultiplier * atr;
		}
		else if (close < lower && macd < signal && Position >= 0)
		{
			SellMarket(Volume + Math.Abs(Position));
			_stopPrice = close + AtrMultiplier * atr;
		}
		else if (Position > 0 && (macd < signal || (AtrMultiplier > 0 && close <= _stopPrice)))
		{
			SellMarket(Position);
		}
		else if (Position < 0 && (macd > signal || (AtrMultiplier > 0 && close >= _stopPrice)))
		{
			BuyMarket(-Position);
		}
	}
}